Innofader Online Store
Innofader Online Store
We have created this store for your convenience in case our products aren't available in your country. In many countries such as Australia, Japan, and the UK where we have local distribution, we will refer your order to a retailer in your country.
mini Innofader Plus
This is the upgrade model for the mini Innofader PNP P. Now has a precision +/- 0.05mm cut point accuracy and 1msec response time. Fits all Innobender and Innofader PNP compatible mixers, plus more: Numark PT-01 Scratch!!! Pioneer DDJ controllers Most Pioneer DJM mixers (see mini Innofader DJM for DJM-300, DJM-500, and DJM-600) Korg mixers Vestax VCI-400 crossfader
Now at last you can have a true mod-free install for your mini Innofader Plus in a Numark PT-01 Scratch! Fits cleanly in the Numark PT-01 Scratch transform switch slot mounted at a 45 degree angle for comfortable scratching. Mini Innofader Plus sold separately.
Innofader Pro2 Description: The Innofader Pro2 is our newest flagship Innofader. It's based on the Innofader Pro but the installation is greatly simplified. Adapter boards are clearly labeled to show you which one to use. In most cases you just plug one end into your mixer, plug the other end into your Innofader Pro2, and you're ready to go!
The Innofader Pro2 is now our new flagship performance standard. It gives you an ultra precise ± 0.05mm cut-in accuracy for even tighter control of your scratches. Separate left and right cut controls make it easy to adjust without the need to recalibrate. And for the perfectionist in you, it even has super precise presets which allow you to do things like shift the cut point by a mere 0.04mm, less than even the thickness of your hair.
The latest Innofader! Works like the original, but no adapter boards are needed. Calibration button is on the fader itself. Also includes adapter plates for DJM-800 and DJM-900 as well as the cable for Denon and Rane Empath mixers.
mini Innofader DJM
This is a special mini Innofader designed for the DJM-300, DJM-500, and DJM-600.
The Innobender is an Innofader with added special adapters designed to allow the Innofader to fit into extremely tight spaces. Currently we have done extensive testing and know the Innobender can fit into the following MIDI controller and mixer models:
The picture illustrates how even on a MIDI controller with an extremely low profile, there is still enough space for your beloved Innofader!
Use the Innojuster with the Innofader to turn your cheap analog mixer into a pro mixer.
Get more adjusment flexibilty on any mixer by tapping into the Innofader's wide range of adjustments from outside the mixer.
Compatible with all Innofader models, except for PNP models, it only works with 4 pin fader cables that plug in directly to the Innofader adapter PC board.
This is a special version of the Innofader designed to work with the Pioneer DJM-909 and DJM-707.
mini Innofader Plus S
Does your controller have a cheap fader soldered to the PC board? The mini Innofader Plus S is an ultra smooth, long lasting replacement. Now with 1msec response time and +/- 0.05mm cut accuracy. Afraid of soldering? Please contact us directly email@example.com. If you send us your mini Innofader PNP S compatible controller, we can do a FREE installation for you!
Innofader Pro B-Stock
Fully working Innofader Pro that's just as good as new. One year standard warranty is included. ****Note further discounts are available if you can accept heavily used product or product with limited accessories. Please inquire directly at firstname.lastname@example.org
Innofader PNP B Stock
Fully working Innofader PNP that's just as good as new. One year standard warranty is included. ****Note further discounts are available if you can accept heavily used product or product with limited accessories. Please inquire directly at email@example.com
Fully working Innofader that's just as good as new. One year standard warranty is included. ****Note further discounts are available if you want to order just the main Innofader piece without the accessories. Also have one with a Rane TTM adapter included. Please inquire directly at firstname.lastname@example.org
Innofader PNP Digital
This is a special version of the Innofader PNP which can work as a digital fader for Behringer NOX mixers fitted with the Infinium fader.
It works with Behringer NOX 202, 303, 404, 606, and 1010.
Make sure if you have one of the above mixers that you special order this part from us because the standard Innofader PNP will not work.
Pioneer DJM-900 Installation Kit
For those who can't wait, we just got in extra DJM-900 adapter plates which we can ship separately. These can be used with either old Innofader Pros or original Innofaders which do not have this adapter plate
Just in case you lost yours, we got replacements. All versions are in stock.
For the American Audio VMS4
This cover is specially fitted for the VMS4 to protect the Innofader. Replace the original plate under the crossfader with this piece when installing the Innofader.
Innofader PNP Xone
This is the Innofader PNP modified to fit the Allen & Heath Xone: 23 / 23C / 43 / 43C mixers. Please make sure you purchase this model because this is the only standard model which is compatible. Available beginning of April 2017. Please feel free to pre-order and we will bill you when the order is ready to ship. We can also modify existing product prior to then but it will be labeled differently.
mini Innofader duo
The mini Innofader duo makes upgrading more affordable than ever. With two - yes two! - mini Innofaders in a single package, you can swap your Z2 channel faders. Or you can use one and still have a spare mini innoFADER to keep you up and running!
Works as a replacement for the following:
Akai AMX crossfader
Hercules RMX2 crossfader
All DJ-Tech DIF crossfaders
All Epsilon Inno-MIX crossfaders
TRX channel faders and crossfader
Traktor Z2 channel faders and crossfader
All Reloop RMX and Terminal Mix crossfaders
All American Audio MXR and VMS crossfaders
mini Innofader S9
This is a special mini Innofader Plus modded to work with the DJM-S9. The main piece is modded plus there is an added adapter plate and two screws for mounting to the S9 mixer. Available beginning of April 2017. Please feel free to pre-order and we will bill you when the order is ready to ship.
Pioneer DJM-800 installation kit
This kit includes a special adapter plate to allow the Innofader to fit in the DJM-800 without any need for drilling holes. Also include 2 special screws which are flush with the adapter plate for an ideal fit.
Now you can get a full bodied Innobender into your tightly spaced controller or mixer for a much lower price. Works for the following products: